How to Create Your Own Dog Mask – The Basics

In this article we’re going to look at how to create your own dog mask. We’ll cover the basics and then go on to take a look at some of the more advanced tips and tricks which you can use.

If you have a dog that likes to bark, and particularly if your dog loves to play in the garden and other areas of the house, you will need to get them some particular dog protection.

Paper Plate 3d Dog Mask DIY Materials: This is the first part of the set-up that will look a little scary at first, but it’s really very straightforward. All you’ve got to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can not simply cut a rectangular shape from the cardboard, so you’ll have to cut around the edge of the mask so you get something that looks like a cone. The most important thing here is to be realistic with what kind of paper plate that you’re using.

Then you will have to wrap the cardboard around the edges of the paper plate, making certain that there is a good seal between the two pieces so that you can ensure that nothing will leak when you put the mask on. Make sure the edges are cut so the edges are not sharp, as this may damage the edges of the mask.

Glue it on! The next step involves using some paint. You should spray the paint over the cardboard, making certain it runs smoothly and evenly across the entire mask. You will want to start with one side of the mask first, so that you can work your way around it before moving onto the other side. The paint needs to be slightly thicker than the cardboard, and it is best that you leave about one-fifth of an inch of paint on the edges so that it runs across the cardboard.

Don’t fret too much about the paint getting stuck to your mask. It’s easy to remove it later, and it will leave you with a wonderful finished mask to show off to everyone! It’s also a good idea to wash away any excess paint once you are done, so you don’t end up with smudges or smears on your dog.

Then it is time to paste the mask onto your dog’s head. First you need to be certain that you have a secure fit between the mask and your dog’s head. Once you’ve made sure that it is secure, then you may begin to glue the mask onto the dog’s face. Take the piece of cardboard that is used for the base of the mask and then fold it over. Make certain it’s quite strong and then use your hands to ensure the cardboard down in place.

Keep your hands out of the way and use tape to hold it in place as you repeat the procedure on the cardboard folds till you have the mask snugged securely onto the face of your dog. Do not make the folds too big or else it might look messy. As soon as you’ve done this, you can then take out the mask http://wot.bplaced.de/?p=28358 and attach the cardboard ears. And attach the other part of the mask on the dog. Be sure the ears are level and be sure that it is not too short or long as this can cause some problems with the mask slipping off the dog’s face.

If you’re using a dog mask as your pet security, you’ll need to do some sanding to make certain it’s secure on your dog. You can accomplish it by sanding off any excess paper that may have been eliminated from your mask.

Trả lời

Email của bạn sẽ không được hiển thị công khai.